Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS
Choose a sub category:
WATER HEATERS - GAS WATER HEATERS - ELECTRIC WATER HEATERS - TANKLESS GAS
WATER HEATERS -TANKLESS ELEC WATER HEATER ACCESSORIES WATER HEATER REPAIR PARTS

WATER HEATERS

Sort By:
1 2 3 ... 6
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 11523 Drain Valves
Danco 88493 Water Heater Washer, Rubber
List Price: $2.59
Our Price: $2.10
Savings: $0.49
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Water heater supply line washer. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit B and K 168-003NL Dielectric Unions
Camco 11061 Flared Water Inlet Dip Tube With Gasket, 52 in Vertical, PEX
List Price: $4.79
Our Price: $3.65
Savings: $1.14
Camco 07133 Universal Element Gasket Kit
List Price: $4.99
Our Price: $3.93
Savings: $1.06
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 10862 Side Mount Runoff Tube B K Industries 168-004NL Dielectric Unions Camco 10623 Dielectric Nipple
Camco 10862 Side Mount Runoff Tube, Thermoplastic Polypropylene
List Price: $6.49
Our Price: $5.11
Savings: $1.38
Camco 10623 Dielectric Nipple, 3/4 in, MPT, 2-1/2 in L
List Price: $6.99
Our Price: $5.14
Savings: $1.85
Presents a rigid surface for gripping with standard wrenches. Can be cut to desired length. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
Camco 2143 High Watt Density Water Heater Element B and K 167-004NL Dielectric Unions B and K 102-816 Water Heater Drain Valves
UL Listed, gasket included. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
WaterFlex 0437012 Corrugated Flexible Water Heater Connector Camco 07223 Adapter Kit B and K Industries 168-005NL Dielectric Unions
Camco 07223 Universal Adapter Kit
List Price: $8.99
Our Price: $7.40
Savings: $1.59
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 2343 High Watt Density Water Heater Element Camco 11260 Drain Pan With 1 in PVC Fitting Camco 9973 Quick Change Element Tool
UL Listed, gasket included. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 2203 High Watt Density Water Heater Element Camco 7723 Dual Element Lower Water Heater Thermostat
Camco 7723 Dual Element Lower Water Heater Thermostat, 240 V
List Price: $11.99
Our Price: $9.29
Savings: $2.70
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL Listed, gasket included. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element
Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat, 240 V
List Price: $11.99
Our Price: $9.29
Savings: $2.70
UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed, gasket included. UL Listed, gasket included.
Camco Mfg 10473 Pressure Relief Valve 3/4 In Camco 11460 Drain Pan With 1 in PVC Fitting Camco 10023 Water Heater Continuity Tester With Battery
Camco 10023 Water Heater Continuity Tester With Battery
List Price: $11.99
Our Price: $9.73
Savings: $2.26
3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Test your elements and thermostats while still in the water heater. 1 piece.
CopperFlex WB00-12N Water Heater Connector Camco 2293 High Watt Density Water Heater Element Camco 2283 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UL Listed, gasket included. UL Listed, gasket included.
   
 
1 2 3 ... 6