Home > HARDWARE > CONSTRUCTION HARDWARE > FOUNDATION HARDWARE
Choose a sub category:
ROD CHAIRS TIE WIRE / TOOLS ANCHOR BOLTS
CONCRETE PIER FORMS/CAPS FLOOR JACK POSTS FOUNDATION ACCESS DOORS
REBAR PINS/REBAR CAPS NAIL STAKES ADHESIVE ANCHORING

FOUNDATION HARDWARE

Sort By:
1 2 3
Acorn BT176-1C Bar Tie REBARP NO.4 1/2X24IN          Marshalltown 14731 Manual Tie Wire Twister
Acorn BT176-1C Bar Tie, 17 ga x 6 in L
List Price: $2.59
Our Price: $2.64
REBARP NO.4 1/2X24IN
Our Price: $3.53
Used to secure the position of rebar during concrete pouring. Designed for use in foundation construction, concrete forms and post reinforcement. ASTM A615-14 Grade 40. Safely and easily twists wire bar ties. Plastic handle. Rugged design. Compact size allows the tool to be used in tight space.
Stanley 316489 Weldable Rebar Mintcraft 16570 Rugged Wire Twister Billy Penn 08212-25 Manual Bar Tie Twister
Stanley 316489 Weldable Rebar, 1/2 in, NO 4, 36 in OAL, Steel
List Price: $6.99
Our Price: $5.49
Savings: $1.50
Mintcraft 16570 Rugged Wire Twister
List Price: $6.99
Our Price: $5.54
Savings: $1.45
Billy Penn 08212-25 Manual Bar Tie Twister
List Price: $6.99
Our Price: $6.58
Savings: $0.41
Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 36 in Overall Length, Steel Safely and easily twists wire bar ties. Hardwood handle, Ergonomic design. Makes tying fast and easy. Wood handle.
Stanley 346965 Weldable Rebar Quik-Tube 6922-01 Building Form Stanley 316497 Weldable Rebar
Stanley 346965 Weldable Rebar, 1/2 in, NO 4, 4 ft OAL, Steel
List Price: $10.99
Our Price: $7.40
Savings: $3.59
Quik-Tube 6922-01 Building Form, 8 in Block, Ridged Fiber
List Price: $8.99
Our Price: $7.69
Savings: $1.30
Stanley 316497 Weldable Rebar, 1/2 in, NO 4, 72 in OAL, Steel
List Price: $10.99
Our Price: $9.61
Savings: $1.38
Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 4 ft Overall Length, Steel, Used in Landscaping Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 72 in Overall Length, Steel, Used in Landscaping
Quikrete 6922-02 Concrete Quik-Tube Form Ad Tech T3438CK Mixing Nozzle Kit Quik-Tube 6922-03 Building Form
Quikrete 6922-02 Concrete Quik-Tube Form
List Price: $11.99
Our Price: $9.72
Savings: $2.27
Ad Tech T3438CK Mixing Nozzle Kit, 3 Pieces, 3/8 in Diameter X 15 in Length
List Price: $13.99
Our Price: $11.86
Savings: $2.13
Quik-Tube 6922-03 Building Form, 12 in Block, Ridged Fiber
List Price: $12.99
Our Price: $12.21
Savings: $0.78
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Nozzle kit for Ultrabond epoxy 22 oz. system.  Hi-Flow nozzles reduce waste while increasing flow. 15 inch length snaps off to 10 inches if required.  3/8 diameter at tip.  Built in mixing nut allows for fast and easy attachment to cartridge. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
FORM CONCRETE FOOT PLASTC 22IN Ultra Bond 1 A9-1 Anchoring Adhesive Miraclebond 1350 A9-MB1350HN Anchoring Adhesive
Sound Footings SF 22 Square Foot Concrete Footing Forms, 22 x 16.6 Inch WxL
List Price: $26.99
Our Price: $18.88
Savings: $8.11
Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle. Two component (1:1 ratio), 100-percent solids, high aspect ceramic blend, solvent-free, non-sag, high strength, high modulus, moisture insensitive epoxy system. Ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block and other substrates. Can also be used for repairing holes, spalls, cracks in concrete, repairing rotted wood, installing and repairing anchor bolts or hand rails. LIMITATIONS: Minimum substrate and ambient temperature 40 degrees F (4.44 degrees C),  Cartridge with two nozzles; medium duty caulking tool required.
Marshall JP16 Adjustable Extend-O-Post Jackpost FORM CONCRETE FOOT PLASTC 28IN Marshalltown TWR26 Tie Wire Reel
Sound Footings SF 28 Square Foot Concrete Footing Forms, 28 x 20 Inch WxL
List Price: $29.99
Our Price: $21.59
Savings: $8.40
Marshalltown TWR26 Tie Wire Reel, Plastic, Red
List Price: $29.99
Our Price: $22.68
Savings: $7.31
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Made of lightweight durable plastic to give many years of trouble free use. Fits any standard size belt. Accomodates all types of tie wire.
Ultra Bond 1300 A22-1300N Anchoring Adhesive Ultra Bond 1 A22-1 Anchoring Adhesive Marshall JP36 Adjustable Extend-O-Post Jackpost
Two  component (1:1 ratio), 100 percent solids, high modulus, structural epoxy gel. It is a solvent free, low odor high strength, moisture insensitive, non-sag epoxy system. The resin and hardener are uniformly dispensed from a dual cartridge system and mixed simultaneously through a mixing nozzle or available in bulk. Long working time with a full cure in 24 hours. Moisture insensitive, may be used in damp environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications. Structural bonding of concrete to concrete. Meets ASTM C881-14: Type I, II, IV and V, Grade 3, Class B and C. Cartridges with Nozzle. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
Marshalltown TWR19 Tie Wire Reel Acorn NSR3418 Round Nail Stake Marshall JP55 Adjustable Extend-O-Post Jackpost
Marshalltown TWR19 Tie Wire Reel, Cast Aluminum, Gray
List Price: $47.99
Our Price: $36.21
Savings: $11.78
Nail Stake 3/4x18in Round - Case of 10
List Price: $35.99
Our Price: $39.10
Constructed of light weight aluminum. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
Acorn BC214 Rod Chair National Nail 1/2X8 Pre-Formed Anchor Bolt Billy Penn 8200 Double Rod Chair
Acorn BC214 Rod Chair, 2-1/4 in H, Plastic
List Price: $37.99
Our Price: $40.60
Anchor Bolt 1/2x8in Steel - Case of 50
List Price: $49.99
Our Price: $41.00
Savings: $8.99
Rod Chair 3x3/4in Dbl No2metal - Case of 100
List Price: $49.99
Our Price: $47.00
Savings: $2.99
Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Used to hold rebar off grade and centered in the foundation trench.
Acorn BT174-5M Bar Tie National Nail 1/2X6 Pre-Formed Anchor Bolt Billy Penn 8201 Triple Rod Chair
Acorn BT174-5M Bar Tie, 17 ga x 4 in L
List Price: $49.99
Our Price: $47.25
Savings: $2.74
Anchor Bolt 1/2x6in Steel - Case of 50
List Price: $62.99
Our Price: $48.50
Savings: $14.49
Rod Chair 3x5/8in Tri No3metal - Case of 100
List Price: $52.99
Our Price: $51.00
Savings: $1.99
Used to secure the position of rebar during concrete pouring. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Used to hold rebar off grade and centered in the foundation trench.
   
 
1 2 3