Home > HAND TOOLS > TRADESMAN TOOLS > SIDING & GUTTER TOOLS > SIDING & GUTTER TOOLS
Sort By:
1
Malco SRT2 Siding Removal Tool Malco FCFG Siding Facing Gauge MINI TRIM PUNCH
Malco SRT2 Siding Removal Tool, 6-1/4 in L, Steel
List Price: $8.99
Our Price: $7.28
Savings: $1.71
Malco FCFG Siding Facing Gauge, 5 in L, Nylon, Red
List Price: $19.99
Our Price: $15.40
Savings: $4.59
MINI TRIM PUNCH
List Price: $19.99
Our Price: $16.11
Savings: $3.88
Malco Siding Removal Tool, Steel, Malco, 6-1/4 in Overall Length, Non-Slip Textured Grip Handle, Red Handle, 1/4 in Hang Hole Peg Hook Malco Siding Facing Gauge, Nylon, Malco, 5 in Length, Red, Used to Accurately Measure the Exposure of the Siding Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4" (31.2 mm) standard trim nails.
Malco TNP2S Trim Nail Punch Malco SL5 Snap Lock Punch Malco FCG2 Overlap Siding Gauge With 5/16 in Fiber Cement Siding
PUNCH TRIM NAIL 8 INCH HVY DTY
List Price: $19.99
Our Price: $16.13
Savings: $3.86
Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4" (31.2 mm) standard trim nails. Malco Snap Lock Punch, Steel, Malco, 1/2 in Jaw Width, 3/8 in Jaw, Alloy Steel Jaw, Cushion Grip Handle, Vinyl Handle, Red Handle, 9 in Overall Length, Applicable Materials: Vinyl and Aluminum, Nickel Plated, For Siding Malco Siding Gauge, Overlap, Steel, Malco, 6 in Length, Silver, 5/16 in Thickness, Includes: (2) Gauges, Used to Accurately Measure the Exposure of the Siding
Malco Redline 5-Blade Pipe Crimper Malco Redline Downspout Crimper Redline NHP1R Nail Hole Punch
Redline NHP1R Nail Hole Punch, 5/32 X 3/4 in Hole, 5/8 in Thick
List Price: $47.99
Our Price: $37.92
Savings: $10.07
Malco Pipe Crimper, 5-Blade, Stainless Steel, Malco, Series: Redline, 1-5/8 in Jaw Width, 1-5/8 in Jaw, Soft-Touch Non-Slip Grip Handle, Red/Black Handle, 9-5/8 in Overall Length, For Making Double Crimp to Downsize Round Duct to Create a Male Fitting Malco Downspout Crimper, Stainless Steel, Malco, Series: Redline, 1-1/4 in Jaw Width, 1-1/4 in Jaw, Soft-Touch Non-Slip Grip Handle, Red/Black Handle, 9 in Overall Length, For Making Double Crimp Downsizes Without Deforming Down-Spout Redline Nail Hole Punch, Redline, 5/32 X 3/4 in Cutting Hole, 5/8 in, Ergonomic Redline Handle, Vinyl/Aluminum Handle, Black Handle, 8-1/2 in Overall Length, Includes: (1) 5/32 X 3/4 in Redline Nail Hole Slot Punch, For Punching Holes in Vinyl and Aluminum Siding
Redline JCCR 1-Piece J-Channel Cutter Andy MV12 Combination Snip PUNCH SNAP LOCK REDLINE
Andy MV12 Combination Snip, 12 in L Vinyl Grip, Steel
List Price: $49.99
Our Price: $40.54
Savings: $9.45
Malco Redline Snap Lock Punch 1/4 - 5/8 in D Jaw
List Price: $49.99
Our Price: $41.42
Savings: $8.57
Redline J-Channel Cutter, 1-Piece, Steel, Redline, 5/8 in Cutting Capacity, Heat Treated Steel Blade, 1-1/4 in Blade, 8-7/8 in Overall Length, Ergonomic Soft-Touch, Non-Slip Handle, Nickel Chrome Plated, Red, 0.841 in Width of Cut, For Making Drain Tabs, Downstream Notch Cutouts and 45 deg Miter Trim Cuts Andy Combination Snip, Andy, 3 in Length of Cut, Left/Right Cut, 12 in Overall Length, Knife Like Edge Blade, Steel Blade, Vinyl Grip Handle, Aluminum Handle, Applicable Materials: Heavy-Grade Vinyl Siding and Aluminum Trim Coil, For Cutting Thick or Layered Vinyl Malco Snap Lock Punch, Series: Redline, 1/4 - 5/8 in Jaw, Ergonomically Contoured Handle, For End Caps onGutters
Redline SL8R Snap Lock Punch Allway SW100 Siding Wedge Redline S2R Hand Seamer
Redline SL8R Snap Lock Punch, 1/2 in D Jaw, Alloy Steel, Red Vinyl Handle
List Price: $52.99
Our Price: $42.99
Savings: $10.00
WEDGE SIDING ALUMINUM 100/BAG - Case of 5
List Price: $54.99
Our Price: $45.40
Savings: $9.59
Redline S2R Hand Seamer, 3-1/4 in W X 1-1/4 in D Jaw, 8 in OAL, Forged Steel
List Price: $59.99
Our Price: $49.54
Savings: $10.45
For securing vinyl skirting and siding to finishing trim. Produces wider, more secure locking tab projections. Tabs grip a greater surface area and guard against dislodging due to relaxation of vinyl from heat. Installations also resist blowout during times of high pressure and wind. Constructed of steel stampings and rugged investment cast alloy steel jaws. Nickel plate and black oxide finish with compound leverage design ergonomic REDLINE handles with unique one hand operation latch. Not Recommended for use below 32 degrees F (0 degrees C). Throat Depth 1/2"; Length 8-1/2". Allway Siding Wedge, Aluminum, Allway Redline Hand Seamer, Steel, Redline, 22 ga Mild/24 ga Galvanized/26 ga Stainless Steel Metal Gauge Capacity, 3-1/4 in Jaw Width, 1-1/4 in Jaw, Forged Steel Jaw, 1/4 in Increments Graduation, Soft-Touch With Non-Slip Handle Insert Handle, Steel Handle, Red/Black Handle, 8 in Overall Length, Nickel Plated, For Bending and Flattening Metal
Redline S3R Offset Hand Seamer Gecko SA903 Siding Gauge With 5/16 in Fiber Cement Siding Redline S6R Hand Seamer
Redline S6R Hand Seamer, 6 in W X 1-1/4 in D Jaw, 8 in OAL, Forged Steel
List Price: $79.99
Our Price: $64.45
Savings: $15.54
Redline Hand Seamer, Offset, Steel, Redline, 22 ga Mild/24 ga Galvanized/26 ga Stainless Steel Metal Gauge Capacity, 3-1/4 in Jaw Width, 1-1/4 in Jaw, Forged Steel Jaw, 1/4 in Increments Graduation, Soft-Touch With Non-Slip Handle Insert Handle, Steel Handle, Red/Black Handle, 8 in Overall Length, Nickel Plated Gecko Siding Gauge, Plastic, Gecko, 5 - 8 in Length, Used to Install Primed or Pre-Painted Cement-Board Siding Without Lines on Wall Redline Hand Seamer, Steel, Redline, 22 ga Mild/24 ga Galvanized/26 ga Stainless Steel Metal Gauge Capacity, 6 in Jaw Width, 1-1/4 in Jaw, Forged Steel Jaw, 1/4 in Increments Graduation, Soft-Touch With Non-Slip Handle Insert Handle, Steel Handle, Red/Black Handle, 8 in Overall Length, Nickel Plated, For Bending Sheet Steel and Non-Ferrous Metals
Pactool SA90338 Gecko Gauge Siding Gauges Pactool SA90376 Gecko Gauge Siding Gauges Pactool International SS211 Manual Fiber-Cement Shear
Pactool SA90338 Siding Gauge, For Use With 3/8 in T LP Siding Products, Green
List Price: $84.99
Our Price: $66.69
Savings: $18.30
Pactool SA90376 Siding Gauge, For Use With 7/16 in T LP Siding Products
List Price: $84.99
Our Price: $66.69
Savings: $18.30
Pactool International SS211 Manual Fiber-Cement Shear
List Price: $249.99
Our Price: $193.50
Savings: $56.49
Pactool Siding Gauge, Suitable For Use With: 3/8 in Thick LP Siding Products, Green, 8-1/2 in Length x 2 in Width x 1-1/2 in Depth Pactool Siding Gauge, Suitable For Use With: 7/16 in Thick LP Siding Products, 8-1/2 in Length x 2 in Width x 1-1/2 in Depth Pactool International Fiber-Cement Shear, Manual, 5/16 in Cutting Capacity, 12 in Length of Cut, Steel Handle, 12 in Overall Width, For Indoor/Outdoor Operation
Van Mark USA1 Adjustable Collapsible Stand With Wheel Van Mark TC3017 Cutting Accessory HOLDER COIL ALUMINUM
Coil Dispenser Cd24 Trim Coil Dispenser, 40 in W x 40 in L x 37 in H, White
List Price: $779.99
Our Price: $625.31
Savings: $154.68
Van Mark Collapsible Stand, Adjustable, Steel, Van Mark, 6 in Height, Black, Powder Coated, With Wheel Van Mark Cutting Accessory, Steel Tool, Van Mark, Suitable For Use With: Mark I, II and IV Series Brakes, For Cutting Galvanized Steel, Copper, Zinc, Vinyl, Aluminum Sheet and Stainless Steel Used to hold aluminum trim coil for residential siding, roofing, window and gutter installation; holds the rolls of trim coil securely allowing the user to dispense any length needed quickly; comes standard with a slitting guide to allow a TrimCutter (sku # 251.0329) to cut material at desired length. Saves money by securing rolls of trim coil that may otherwise be damaged on the job site.
ACCSRY ALUMINUM BENDER/BRAKE  TrimMaster Mark II Metal Bender
Trim-A-Brake II T1050 Siding Brake, 10 ft L, Aluminum/Galvanized Steel, Anodized, Black
List Price: $1,579.26
Our Price: $1,325.54
Savings: $253.72
TrimMaster Mark II Metal Bender, 5/8 in L x 14 in W, 180 deg, Aluminum, Powder Coated
List Price: $2,183.06
Our Price: $1,812.24
Savings: $370.82
Portable bending brake for capping and trimming fascia, doors, windows and siding; designed for simple, 90? bends. "Do-it-yourselfer" tool. TrimMaster Metal Bender, Aluminum, TrimMaster, Series: Mark II, 26 ga Stainless Steel Bending, 5/8 in Bending, 14 in Bending, 180 deg Bend Angle Capacity, Dual Bending Handle, 10 ft 6 in Overall Height, Applicable Materials: Aluminum Trim Coil, Light Steel and Copper, Powder Coated, For Builders, Contractors and Hobbyists
   
 
1